SAN - Solaris

Quelques commandes utiles, en vrac, pour gérer le SAN sous Solaris.

• afficher les ports fibres et leur état : luxadm -e port

# luxadm -e port
/devices/pci@300/pci@1/pci@0/pci@4/SUNW,emlxs@0/fp@0,0:devctl      CONNECTED
/devices/pci@300/pci@1/pci@0/pci@4/SUNW,emlxs@0,1/fp@0,0:devctl    NOT CONNECTED

• afficher tous les volumes SAN présentés au serveur : luxadm probe

# luxadm probe
No Network Array enclosures found in /dev/es

Found Fibre Channel device(s):
  Node WWN:50060160c4600c6c  Device Type:Disk device
    Logical Path:/dev/rdsk/c5t5006016944600C6Cd0s2
    Logical Path:/dev/rdsk/c5t5006016044600C6Cd0s2
  Node WWN:50060160c4600c6c  Device Type:Disk device
    Logical Path:/dev/rdsk/c5t5006016944600C6Cd1s2
    Logical Path:/dev/rdsk/c5t5006016044600C6Cd1s2
  Node WWN:50060160c4600c6c  Device Type:Disk device
    Logical Path:/dev/rdsk/c5t5006016944600C6Cd2s2
    Logical Path:/dev/rdsk/c5t5006016044600C6Cd2s2
  Node WWN:50060160c4600c6c  Device Type:Disk device
    Logical Path:/dev/rdsk/c5t5006016044600C6Cd3s2
    Logical Path:/dev/rdsk/c5t5006016944600C6Cd3s2
  Node WWN:50060160c4600c6c  Device Type:Disk device
    Logical Path:/dev/rdsk/c5t5006016044600C6Cd4s2
    Logical Path:/dev/rdsk/c5t5006016944600C6Cd4s2